No.1 Lutai AVE, High-tech Industrial Area, Zibo City,Shandong Province, China

+86 533 3170168
+86 533 3179168
info@shingchem.com
+86 18561806005
ETFE PARTICLE
ETFE PARTICLE
INQUIRY NOW
EMAIL

ETFE PARTICLE

ETFE, With Good Mechanical Properties, Weather Resistance, Flame Retardant, Gas Barrier And Chemical Resistance, Is One Of The Strongest Fluorine Plastics. In Addition To The Excellent Properties Of Other Fluorine Resins, It Also Has The Characteristics Of Radiation Resistance, Strong Adhesion To Metal Surfaces, And Lighter Than Other Fluorine Materials. ETFE Products Are Divided Into Powder, Liquid And Particle Three Forms, Can Be Sprayed, Roll Coating, Extrusion, Injection Molding And Other Processing Technology, With Anticorrosive Lining, Film, Hose, Cable And Other Forming Parts, Widely Used In Chemical Industry, Agriculture, Construction, Electronics, Automotive And Many Other Fields.


Model
Melt Index（g/10min）
Processing Method
Feature
Application
SE805L
0.1～5.0
Molding
Melting Point 245 ~ 255℃ Granules
Mainly Used For Heat Shrink Pipe, Lining, Cable Insulation Layer, Etc.
SE815L
5.1～15.0
Molding, 
Injection Molding, Extrusion
Melting Point 245 ~ 255℃ Granules
Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On.
SE815M
Melting Point 245 ~ 255℃ Film Grade Granule
SE615L
Melting Point 220 ~ 230℃ Granule
SE615M
Melting Point 220 ~ 230℃ Film Grade Granule
SE825L
15.1～25.0
Injection molding, Extrusion, 
Blow Molding
Melting Point 245 ~ 255℃ Granules
Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On.
SE825M
Melting Point 245 ~ 255℃ Film Grade Granule
SE625L
Melting Point 220 ~ 230℃ Granule
SE625M
Melting Point 220 ~ 230℃ Film Grade Granule
SE835L
25.1～35.0
Injection molding, Extrusion, Blow Molding
Melting Point 245 ~ 255℃ Granules
Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On.

SE635L

Melting point 220 ~ 230℃ granule
SE845L
35.1～45.0
Injection molding, Extrusion, Blow Molding
Melting Point 245 ~ 255℃ Granules
Mainly Used For Cable Insulation Layer, Pipe, Plate, Film And So On.
Item
Unit
SE8 Series
SE6 Series
Appearance
---
Transparent Particles, Which Shall Not Contain Impurities Such As Metal Chips And Sand Particles, And The Percentage Of Particles Containing Visible Black Spots Shall Not Exceed 2%.
Melting Point
℃
245～255
220～230
Proportion
g/cm3
1.70～1.75
1.76～1.85
Rockwell Hardness
HB
61～70
50～60
Tensile Strength (23 ℃)
Mpa
30～50
28～45
Elongation At Break (23 ℃)
%
300～450
300～450
Notch Impact Strength(23℃)
Ft-lb/in
No Break
No Break
Water Absorption
%
≤0.03
≤0.03
Oxygen Index
%
30～40
>50
Flame Retardant Rating
Level
V-0
V-0
Dielectric Constant
/
≤2.4
≤2.4
Dielectric Loss
/
0.008
0.008
Breakdown Resistance Voltage（0.2mm）
KV
≥7.5KV
≥7.5KV
Glass Transition Temperature
℃
80～120
80～120
Usage Temperature
℃
-50～150
-50～150

ATTENTION


PACKING

ETFE Pellet Products, Single Bag, 20KG/ Bag.

PRECAUTIONS
1.  When Applying And Processing Products, Corresponding Labor Protection Supplies Should Be Worn To Eliminate Safety Hazards Such As Inhalation Of Toxic Gases And High Temperature Burns. Open Flames And Smoking Are Strictly Prohibited In The Workplace, And Corresponding Exhaust Devices Should Be Installed;
2.  Products That Have Not Been Put Into Use After Opening Must Be Tightly Sealed To Prevent Foreign Matter From Being Mixed In;
3.  Store The Product In a Cool And Ventilated Place, Away From Fire And Heat Sources;
4.  During Transportation, Pay Attention To Sun Protection, Moisture Protection, Standing Upright, And Handling With Care;
5.  Product Waste Must Be Disposed Of In Accordance With Relevant Laws And Regulations.

Related products

INQUIRY